Produse pentru 2 tuburi de titan (34)

Alloys 304 (S30400) and 304L (S30403) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. High strength, excellent corrosion resistance and minimized carbon content make Alloy 304 and 304L Stainless Steels useful for applications where welding is required. Uses include architectural mouldings and trim, welded components of chemical, textile, paper, pharmaceutical and chemical industry processing equipment. Other advantages are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. For severely corrosive environments,the lower content of Type 304L is preferred because of its greater immunity to intergranular corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):500 J/kg/°K Thermal conductivity:16.2 W/m/°K Thermal Expansion:17.2 μm/μm/°C Modulus Elasticity:19.3 Gpa Electrical Resistivity:7.23 μohm/cm Density:8.0 g/cm3

Tube en inox 304 diamètre 48,3 mm, épaisseur 2 mm, finition brossé satiné (Grain 320), longueur 3 m Référence:0660.0300.4021 Matière:Inox 304 (Intérieur) Finition:Brossé satiné Usage:Intérieur ou Extérieur, hors milieu salin (bord de mer) et chloré (piscines) Diamètre tube:42,4 x 2 mm Longueur:3 mètres Section:Rond

316LN (UNS S31653) is a low-carbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. The nitrogen in Type 316LN adds additional resistance to sensitization in some circumstances. The nitrogen content of Type 316LN stainless steel also provides some solid solution hardening, raising its minimum specified yield strength compared to Type 316L stainless steel. Like Types 316 and 316L, the Type 316LN alloy also offers good resistance to general corrosion and pitting/crevice corrosion. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):485 J/kg/°K Thermal conductivity:16.3 W/m/°K Thermal Expansion:16.5 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:7.4 μohm/cm Density:7.99 g/cm3

S20910 stainless steel provides a combination of good corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by types 316 and 316L, plus approximately twice the yield strength at room temperature in the annealed condition. In addition S20910 stainless steel has very good mechanical properties at both elevated and sub-zero temperatures a well as outstanding cryogenic properties. And, unlike many austenitic stainless steels, 22-13-5 stainless steel can be heavily cold worked to enhance its yield strength and remain non-magnetic. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):475 J/kg/°K Thermal conductivity:13.3 W/m/°K Thermal Expansion:16.2 μm/μm/°C Modulus Elasticity:200 Gpa Electrical Resistivity:82 μohm/cm Density:7.88 g/cm3